The Sony BVM-14F5U features .25mm CRT for 800 TVL resolution, SMPTE C Phosphors, a built-in controller, an IC Memory Card slot, and a Beam Current Feedback system for stabilized color temperature. Other features include four input module slots for BKM input decoder/adapters (up to 24 composite inputs), one permanent RGB/Component input, data save/exchange through RS-485 or IC Memory card (via BKM-10R or BKM-11R), a modular chassis construction, Auto-setup (chroma, phase), Auto White; Balance using industry standard color analysers (Minolta, Thoma, Phillips), and 16:9/4:3 aspect ratios. An Engineers Requirement
With 800 lines horizontal resolution, the BVM-14F5U will display the highest quality video for the most critical evaluation. All set-up features are found directly on the front panel of the unit for immediate access. Once set-up is complete the monitor can have its settings memorized via a PCMCIA card and applied to any monitor with using a BKM-10R control panel. NTSC and PAL are supported standard and SECAM system is an option. | Wide-Screen Display Feature
The monitor has screen masks for both 4:3 and 16:9 aspect playback. These masks allows the viewer to see the video without having to look at the unused portion of the screen. | 4 Empty Slots for Your Individual Project Requirements
Depending what your edit suite is being used for, the BVM-14F5U can be adapted for any standard definition video signal. Optional boards for uncompressed digital SDI conveniently include Analog Composite inputs and outputs also. A dedicated analog board supplies additional Component, Y/C and Composite inputs and outputs. Going even further there is room for expansion boards that simply give you additional analog or digital connectors, whichever you might require. Multi-standard facilities and workstations can install a PAL-M option or another board that supplies everything including SECAM. |
| Application | Engineering, Evaluation | | CRT Size | 13 Inch | | Video System | NTSC, PAL and SECAM | | Maximum Resolution | 800 Lines | | Phosphor | SMPTE-C Standard | | Color Temperature Pre-Sets | Factory Adjusted D65 Preset and Manual Control | | Input and Output Connectors | Analog Component Video- Standard with BNC (x 3 input, looping output)
Sync- Standard with BNC(x 1 input, looping output)
Remote Control- Standard with 9-Pin (x 2)
ISR Interface- Standard with 9-Pin (x 1)
SDI Video- Optional with BKM-20D, BKM-21D and BKM-22X
Y/C Video- Optional with BKM-24N, 25P, 26M, 27T, and BKM-28X
Composite Video- Optional with BKM-20D, BKM-21D and BKM-22X
Composite Video- Optional with BKM-24N, 25P, 26M, 27T, and BKM-28X
| | Set-Up Features | Aspect Switchable
Degauss
Underscan
H/V Delay
Blue Gun | | Rack Mount | BKM-30E14 Rack Mount and Slide Kit | | Power Requirements | 100 to 240 Volts AC, 50 or 60 Hz | | Power Consumption | 130 Watts | | Dimensions (WxHxD) | 19 x 11 1/8 x 20 7/8 inches
482.6 x 282.6 x 533.4 mm | | Weight | 57 lbs
26 kg |
|
