The Sony BVM-D20F1U is optimized for the DTV world. The monitor supports 480i, 480p, 720p, and 1080i inputs; it accepts signals with a frequency range of 15.625 kHz to 45 kHz; and features SMPTE-C standard phosphors in the CRT with 900 TV lines of resolution. Four new option slots with new input decoder and expansion boards are available for a variety of input configurations. Other features include a built-in auto set-up system for chroma, phase, and white balance; a Digital Uniformity Adjustment menu for adjustment of color and brightness variance at the edges of the screen; and ITU 709 Matrix interchangeability. High Resolution for High Definition Video
The monitor can display 900 lines horizontal resolution in 4:3 mode and 700 lines in widescreen mode. As with all Sony professional CRT displays, this model uses the broadcast industry standard SMPTE-C phosphors. Manual setting of color is also possible. | Wide-screen Display Feature
The monitor will display 16:9 aspect as well as 4:3 conventional footage without pulling or stretching the image. An included 16:9 mask allows the viewer to see the wide-screen image without seeing blank vertical lines top and bottom of the screen. | Expansion Slots for Flexibility
The BVM-D20F1U can be adapted for any high definition or standard definition video signal. It comes standard with analog component, 3-BNC connectors, input and output. The monitor has 4 slots for expansion boards. The HD-SDI expansion board will decode any current HD format signal including 1080i/24 frame video. Standard Definition SDI, additional Y/ R-Y/B-Y Component, RGB, Y/C and Composite Video are all possible additions. | The Optional Controllers
Optional controllers can tweak critical monitor parameters so the display has the perfect picture output. With the BKM-10R, a control box that can be mounted beneath the monitor or rack mounted, a memory card can memorize video parameter settings and transfer the data to any like-equipped unit. The BKM-11R is a small, hand-held unit with much the same functionality of the larger unit, but it leaves out the memory card slot. Multiple monitors would have to be calibrated individually. |
| Application | High Definition and Standard Definition Display | | CRT Size | 20 Inch | | Video System | NTSC, PAL and Secam Supported
Optional Decoder Required for Some Systems | | Maximum Resolution | 900 Lines | | Phosphor | SMPTE-C Standard | | Color Temperature Pre-Sets | | Input and Output Connectors | Analog Component Video/RGB-3-BNC (x 1 input, 1 loop output)
Sync- BNC (x 1 input, loop output)
Remote Control- 8-Pin DIN (x 1)
Remote Control- 9-Pin (x 2)
RS-485 Control- 9-Pin (x 1 input, loop output)
ISR Control- 9-Pin (x 1)
Optional Modules for Decode and Expansion
HD-SDI Video
BKM-41HD provides BNC (x 1 input 1 output)(Uses 2 Slots)
BKM-42HD provides BNC (x 2 input, 2 output)(Uses 2 Slots)
BKM-48X Expansion Module provides BNC (x 6 input, 6 output)
(Expansion Module Requires BKM-41D and/or BKM-42D)
SD-SDI, Analog Component/RGB and Composite Video
BKM-20D provides BNC (x 3 input and loop output)(Decodes 525 and 625 digital input)
BKM-21D provides BNC (x 3 input and loop output)(Decodes PAL and NTSC analog input)
BKM-22X Expansion Module- provides BNC (x 3 input, 3 output)
(Expansion Module Requires BKM-20D or BKM-21D)
Composite Video, Y/C and Analog Component provides BNC (x 6 input with loop output) Decodes NTSC System
BKM-25P- provides BNC (x 6 input with loop output); Decodes PAL System
BKM-26M- provides BNC (x 6 input with loop output); Decodes PAL-M System
BKM-27T- provides BNC (x 6 input with loop output); Decodes NTSC/PAL/SECAM systems
BKM-28X Expansion Module-provides BNC (x 6 input, 6 output)
(Expansion Module Requires one or more of the other boards for function)
(Each uses 3-BNC for each of 2 Analog Component Inputs, 2-BNC for each of 2 Y/C inputs, 1-BNC for each of 6 Composite Video Inputs, all which have loop outputs)
BKM-24N- | | Set-Up Features | Full Comprehensive Menu System with BKM-10R
Smart Media Card Menu/Set-Up Capture | | Remote Control | BKM-10R Required
BKM-11R Optional | | Rack Mount | BKM-30E20 Rack Mount and Slide Kit | | Power Requirements | 100 to 120 Volts AC 60 Hz
220 to 240 Volts AC 50 Hz | | Power Consumption | 200 Watts Maximum | | Dimensions (WxHxD) | 17 1/2 x 16 3/8 x 22 1/2 Inches
444 x 414 x 570 mm | Weight | 81 lbs. 9 oz.
37 kg |
|
